BB-8, C-3PO, Finn (Takodana), General Leia
Manual Override - Step One
Take some time to explore the interior of the Resistance Base. Collect studs and pick up a few collectibles before you turn to the business of helping the Resistance against the First Order.
When you’re done exploring, tag to General Leia and interact with the Resistance terminal 1 to open the smaller doors. Speak with the men who were behind the door. Target the group of four grapple handles and tap the indicated button to pull down the top container.
Hop up the containers to reach a hanging bar above the blast door. When it locks in place, power is restored to one side of the doors.
Manual Override - Step Two
Move C-3PO to the protocol access terminal 2. Communicate with the terminal to open the large doors.
Cut through the power unit on the wall 3 with Finn’s lightsaber and use the resultant bricks to repair the track on the ground. Push the large, frozen block down the track (it requires two characters to move it).
The Multi-Build bricks from the rack 4 repair two different parts of the ceiling track. Fix the left-most track first. Place BB-8 atop the rotary control and move the claw along the track so it’s over the frozen block you just moved. You must move the Multi-Build bricks to repair the final stretch of the tracks.
After the claw picks up the block of ice, move it to the spot closest to the X-wing 5. You must move the Multi-Build bricks back to the first repair spot to complete the move.
Push the frozen block along the track until it’s directly behind the X-wing. Connect BB-8 to the power jack to fire the X-wing’s thrusters and melt the ice.
Assemble the now-thawed bricks into the missing power unit for the main blast doors. Jump up and hang on the bar to lower it into place. With both handles down, tag to BB-8 and target the power jack over the center of the doors.
BB-8 Files A Report
Go through the blast doors and speak with the three Resistance officers, who will follow General Leia’s actions. Move her to any of the four red lights on the platform 6 in front of the hangar door. When all four lights turn green, tag to BB-8 and hop on the rotary control.
Tap the multi-colored circles to spin the pipes. Restore the flow of air from both sides so they form a path through the middle pipe at the top. In the room beyond the door, stick with BB-8 and interact with the astromech access 7to upload his data.